I don't remember them costing that much. Try www.kollerdodge.com
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Martin Nowak
Sent: Sunday, June 09, 2002 8:40 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: RE: fender flares
As an added note,
about 3 weeks ago when at the dealership I inquired about them. I was told
$260 for the set of 4. Allready factory painted to match.
Aftermarket will almost surly cost more, and IMO I think they stick out too
much. + the cost to paint them.
Marty
""Ronald Wong"" <ron-wong@cox.net> wrote in message
news:NDBBIHDGKKJOIJDEOCBMOEGLFLAA.ron-wong@cox.net...
>
> The Mopar ones work good. No difference between RT and non-RT. The Mopar
> ones are attached via pins, screws, and double sided tape. They are
ordered
> based on the color of your truck. That cost is included. There are some
> after-market ones that you have to paint.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Eric
> Sent: Sunday, June 09, 2002 8:02 PM
> To: Dodge
> Subject: DML: fender flares
>
>
>
> Greetings.
> I'm considering adding some fender flares to my '99 Dak and need some
> advise. First, is there any difference in the flares used on the "normal"
> Dak, as compared to the R/T version, and IF THERE IS, which would you
> recommend? Secondly, has anyone tried any aftermarket molded pieces?
> Last....is there any pointers I should be aware of as far as
> gasketing/seals/adhesives? Thanks a bunch.
>
> Eric Luce
> '99 Dak EC slt
> 2WD/ 5.2L/ Auto
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:44 EDT