Can you maybe supply the part # and I will check them out.
Thanks,
Marty
""Ronald Wong"" <ron-wong@cox.net> wrote in message
news:NDBBIHDGKKJOIJDEOCBMCEHMFLAA.ron-wong@cox.net...
>
> I don't remember them costing that much. Try www.kollerdodge.com
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Martin Nowak
> Sent: Sunday, June 09, 2002 8:40 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: RE: fender flares
>
>
>
> As an added note,
> about 3 weeks ago when at the dealership I inquired about them. I was told
> $260 for the set of 4. Allready factory painted to match.
> Aftermarket will almost surly cost more, and IMO I think they stick out
too
> much. + the cost to paint them.
>
> Marty
>
>
> ""Ronald Wong"" <ron-wong@cox.net> wrote in message
> news:NDBBIHDGKKJOIJDEOCBMOEGLFLAA.ron-wong@cox.net...
> >
> > The Mopar ones work good. No difference between RT and non-RT. The
Mopar
> > ones are attached via pins, screws, and double sided tape. They are
> ordered
> > based on the color of your truck. That cost is included. There are
some
> > after-market ones that you have to paint.
> >
> > Ron
> > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > For modifications see my DML Profile (URL follows)
> > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> >
> >
> > -----Original Message-----
> > From: owner-dakota-truck@dakota-truck.net
> > [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Eric
> > Sent: Sunday, June 09, 2002 8:02 PM
> > To: Dodge
> > Subject: DML: fender flares
> >
> >
> >
> > Greetings.
> > I'm considering adding some fender flares to my '99 Dak and need some
> > advise. First, is there any difference in the flares used on the
"normal"
> > Dak, as compared to the R/T version, and IF THERE IS, which would you
> > recommend? Secondly, has anyone tried any aftermarket molded pieces?
> > Last....is there any pointers I should be aware of as far as
> > gasketing/seals/adhesives? Thanks a bunch.
> >
> > Eric Luce
> > '99 Dak EC slt
> > 2WD/ 5.2L/ Auto
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:44 EDT