You need to open the TB and look at the underside of throttle blade with a
small mirror, and use a flashlite shining down on the mirror. Do this with
Engine OFF of course. 2K models had the 65 mm and 01 up have the 68 mm.
----- Original Message -----
From: crm <tb.crm@verizon.net>
To: <dakota-truck@dakota-truck.net>
Sent: Monday, June 10, 2002 9:09 AM
Subject: DML: TB questions...
>
> hey guys,
>
> when installing my Z tube friday night, i made it a point to check out my
> TB. i had read that some came with 65mm and others with 68mm. i looked on
> the throttle blade and didnt see the numbers i had expected. the only
> visible numbers on the whole thing (without removing it) were right on the
> top:
>
> 53013163AA
> 08010791 HFM
>
> i seem to recall someone saying that the daks with CA emissions (like
mine)
> are equipped with a 65mm, is that correct?
>
> and just to double-check, i should gain low-end with this correct?
>
> thanks again guys!
>
> -adam
> '01 QC 4.7L auto
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:44 EDT