I'll agree that it may not be necessary, but a reset of the PCM so it can
relearn shift points can't hurt.
TonyC
-----Original Message-----
From: Ronald Wong <ron-wong@cox.net>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Friday, June 14, 2002 8:30 PM
Subject: DML: RE: Re: RE: Re: 3.91 gears ???
>
>You don't even have to do that. The gear change is irrelevant to the
entire
>computer system in your vehicle. The sensor is beyond the gears.
>
>Ron
>00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
>For modifications see my DML Profile (URL follows)
>http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
>-----Original Message-----
>From: owner-dakota-truck@dakota-truck.net
>[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of TonyC
>Sent: Friday, June 14, 2002 10:18 AM
>To: dakota-truck@dakota-truck.net
>Subject: DML: Re: RE: Re: 3.91 gears ???
>
>
>
>On Gen IIIs with the rear axle speed sensor - If you change gears to one of
>the factory available ratios, all you need to do is reset the PCM
afterwards
>to have the PCM recognize the gear ratio change. Assumming you are still
>running a factory height tire, the speedo will be correct.
>TonyC
>
>-----Original Message-----
>From: Ronald Wong <ron-wong@cox.net>
>To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
>Date: Thursday, June 13, 2002 8:16 PM
>Subject: DML: RE: Re: 3.91 gears ???
>
>
>>
>>Huh!?
>>
>>Ron
>>00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
>>For modifications see my DML Profile (URL follows)
>>http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>>
>>
>>-----Original Message-----
>>From: owner-dakota-truck@dakota-truck.net
>>[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of TonyC
>>Sent: Wednesday, June 12, 2002 10:12 PM
>>To: dakota-truck@dakota-truck.net
>>Subject: DML: Re: 3.91 gears ???
>>
>>
>>
>>Self sensing. Just reset the PCM
>>TonyC
>>
>>-----Original Message-----
>>From: Tim Althoff <yllwdkta@insight.rr.com>
>>To: Dml (E-mail) <dakota-truck@dakota-truck.net>
>>Date: Wednesday, June 12, 2002 8:50 PM
>>Subject: DML: 3.91 gears ???
>>
>>
>>>
>>>everything went awesome on truck this past weekend...I love them!
however
>>I
>>>do have two questions. 1) the dumb shift light comes on when I'm in
fifth
>>>gear...anyone know why? 2) does it make the speedometer go faster than
>>your
>>>actual speed or slower?
>>>
>>>Tim Althoff
>>>99 V6 RC 5-speed SY
>>>http://www.yllwdkta.com
>>>http://go.to/ohiomeet
>>>
>>>
>>
>>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:46 EDT