It'll "work"...but stick with a 6x9" cone...you can't go wrong, you'll
have the extra filtration surface, and for future upgrades...it'll
handle 10# boost.
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Tim Althoff
Sent: Saturday, June 15, 2002 10:25 AM
To: Dml (E-mail)
Subject: DML: think this K&N filter would work???
the filter part number is RE-3130. the dimensions of the cone filter is
4.5" (large end) 3.5" (small end) and 7" long. according to Bernds
calculation spreadsheet the CFM rating for the filter is 528 CFM's.
This is going on a 3.9 with some nice mods...opened V8 TB, opened intake
manifold and exhaust. according to bend's spreadsheet the motor needs
396 CFM's but wasn't sure what the needs are now that the motor is
modified...
Tim Althoff
99 V6 RC 5-speed SY
http://www.yllwdkta.com
http://go.to/ohiomeet
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:46 EDT