I've spend plenty of $$ at each, they're both excellent.
Jay W
505/287 Dakota
Eric Jerman wrote:
> Hop,
> I'm not sure about the backspacing...I got my rims and tires from
> www.discounttiredirect.com of course I got 18" rims and low profile tires,
> but they should carry something more along the lines of what you want...the
> shipping is free...Mine came regular old ground freight and it took only 4
> days to get them as they have 4 different warehouses all over the US. Also
> you may want to look into www.tirerack.com you may find something there as
> well.
> HTH
> Eric Jerman
> ----- Original Message -----
> From: "Hop" <hopsdak@hotmail.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Tuesday, June 18, 2002 11:29 AM
> Subject: Re: [2]DML: Wheel backspacing
>
> >
> > I'd like to know the same thing. I'm looking into buying new wheels and
> > tires for my dak after the lift is finished. What's the maximum tire/rim
> > width and height that I can expect to fit under my dak? With the 3" rancho
> I
> > think I'll have no problem fitting 33x12.50's on it with a 10 inch rim.
> Only
> > thing I'm not sure on it the backspacing of the wheels. Also if anyone
> knows
> > of a good place to buy wheel and tire combos I'm all ears. I'm not sure
> what
> > kind of tire as of yet although I know I don't want anything too
> aggressive.
> > I need something that looks cool, works great offroad and has minimal road
> > noise.
> > Thanks, Hop
> > 97 CC SLT 4x4 318 Auto 3:55lsd
> > ----- Original Message -----
> > From: "Woodruff, Jason P" <jason.p.woodruff@boeing.com>
> > > Anyone with replies to this?
> > >
> > > Jay W
> > >
> > > >Date: Thu, 13 Jun 2002 19:55:21 -0700
> > > >From: Jayson Woodruff <woodrufj@yahoo.com>
> > > >What's the biggest backspacing I can get away with on a Gen III?
> > > >
> > > >If it matters, I'm looking at 17x11" wheels with 315 or 335/35/17"
> tires
> > > >on it.
> > > >
> > > >Jay W
> > > >505/287 Dakota
> > >
> > >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:48 EDT