2WDs have coil springs, not torsion bars.
Esler, Joel wrote:
> is this mod only available to 4x4?
>
> Esler, Joel D
>
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of kevin reimer
> Sent: Thursday, June 20, 2002 6:24 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: 2000 Dakota (Torsion Bar)
>
>
>
> No wrench needed, just a socket and extension 1/2" drive and a ratchet. turn
> bolt clockwise to go up, counter to lwr truck.
> ----- Original Message -----
> From: Chris Rininger <crininger@rlstark.com>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Thursday, June 20, 2002 6:11 AM
> Subject: Re: DML: 2000 Dakota (Torsion Bar)
>
>
>
>>Ed:
>>
>>I was under my Dak and it doesn't look that easy to crank the torsion
>
> bars. how
>
>>do you go about this? Is it the same to procedure if you want to release
>
> them of
>
>>all tension to do some front end work? I looks as though it would be
>
> difficult
>
>>to get a wrench on them.
>>
>>Thanks
>>
>>Olznut@aol.com wrote:
>>
>>
>>>When I cranked up the bars on my '01 (only wanted 1"), I remember
>>
> cranking up
>
>>>one side a few more turns than the other to level it out perfectly, 4
>>
> for one
>
>>>side, 7 for the other, the alignment is still in specs. And, on the
>>
> brakes,
>
>>>do it yourself, it's super simple on the Daks
>>>
>>>Ed "Olznut" Halterman Sunland, Ca '01 Dakota Quad Cab SLT+ 4.7L 4x4
>>
> "Silver
>
>>>Streak" '66 Olds F-85 330 V-8, Intense Blue "Project Olds" Will Be
>>
> Finished
>
>>>By The End Of July!!
>>
>>
>
-- -andy andylevy@yahoo.com Maintainer, DML FAQ - http://www.dakota-truck.net/faq/ http://home.twcny.rr.com/andylevy/dakota/ '99 CC 4x4 318 auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:49 EDT