Re: 2000 Dakota (Torsion Bar)

From: Olznut@aol.com
Date: Thu Jun 20 2002 - 23:27:08 EDT


I used an impact, took no time at all, a whopping 5 mins. Just make sure you
mark both the socket and the bolt with white out or something like it and
count 1 turn at a time, then compare height then fine tune it, like I said, I
started with 4 cranks for 1 inch, then the measurements weren't even, and I
ended up cranking the d/s I think a total of 7 times to get it 100% even.
Have fun!!

Ed "Olznut" Halterman Sunland, Ca '01 Dakota Quad Cab SLT+ 4.7L 4x4 "Silver
Streak" '66 Olds F-85 330 V-8, Intense Blue "Project Olds" Will Be Finished
By The End Of July!!



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:49 EDT