Figured out the relay

From: Granpa Silver89 (SilverEightynine@earthlink.net)
Date: Mon Jun 24 2002 - 02:16:51 EDT

Next message: stebel@web.de: "map of member locations"
Previous message: Ncfisher@aol.com: "How to de-sludge an engine?"
Next in thread: Ronald Wong: "RE: Figured out the relay-To Andy Levy"
Reply: Ronald Wong: "RE: Figured out the relay-To Andy Levy"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

In case anyone has been left tossing and turning and losing sleep over
thys mystery - I have solved it. On the two relays that I have here -
(and this is confirmed by testing them) the terminals are as follows...

30= Load
85= Ground
86= Switch
87= 12v Source

Everyone can sleep well now!

-- -----------------------------------

"Hey Ray! Granpa done gone'n hit another light pole!"

Granpa - (Silver98)

1989 Reg Cab, V6, Auto, 8 footer, 4x2 1989 Reg Cab, V6, Auto, 8 footer, 4x4 w plow

Next message: stebel@web.de: "map of member locations"
Previous message: Ncfisher@aol.com: "How to de-sludge an engine?"
Next in thread: Ronald Wong: "RE: Figured out the relay-To Andy Levy"
Reply: Ronald Wong: "RE: Figured out the relay-To Andy Levy"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:49 EDT