Do you suppose the bolts just loosened themselves and fell out? I guess it
could happen. Hmmmm, maybe I'd better go check my tranny bolts. Seriously
though, when they did the flush they didn't change the filter? That's odd.
What's everyone else think? Should you or shouldn't you change the filter
even with a system flush?
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of
creck@NOSPAM.ais.net
Sent: Wednesday, June 26, 2002 7:38 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Advice needed with Transmission leak
I just talked with them and I did the system flush. They said they
didn't do anything with the pan. Is it possible that they overpressured
the system and blew a gasket seal?
I do have 52k miles on the truck and after thinking about it, I don't
think that I have had the transmission pan dropped. Both services that
I've done were system flushes.
Chris
'99 Dakota Sport + CC 4x4 V6 Amethyst
Ronald Wong wrote:
>
> Need to have a serous talk with Jiffy! They're famous for forgetting
bolts,
> putting the oil back in etc.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:51 EDT