Cool! I like things that take no sense. Oh Gee, a double pun...and
intended too! ;-B
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of jkp
Sent: Tuesday, July 02, 2002 10:25 AM
To: DML
Subject: DML: A/C Dash vent info
If you all remember I posted a problem with the vents switching from the
dash to the floor then off while accelerating and Jon from St.Louis had the
same problem. Well I fixed mine today, probably the cheapest fix I have ever
done. First I checked the check valve from the manifold and it was OK, then
I started pulling all the vacuum lines running from the intake to the vacuum
ball to the firewall. All of the rubber ones were fine, BUT the plastic line
was broken 2/3 of the way through about 2 inches from the firewall on the
bottom(almost looked cut). I snipped the bad part out and put a small piece
of vacuum hose(I had in my parts stash) in between and everything is fine
(for now!). I was hoping it wasn't the vacuum ball leaking or the controls
as Jon suggested. Just wanted everyone to know, maybe now my wife will quit
complaining about the A/C. Total involved about a 1/2 hour and zero cents in
parts!
Take Care & Keep On Truckin'~~~~~John
<<'96 Dakota Sport 4x4, 3.9L 5spd>>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:00 EDT