Confirmed. You should fill to the bottom of the fill hole. Requirements
are 4.9 pints of fluid. This includes the required 5 oz. of friction
modifier for those of you that have LSD.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Chris Rininger
Sent: Tuesday, July 02, 2002 10:47 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Rear Diff Capacity (01 Dak w/ 12 bolt)
Can anybody confirm that the rear diff on an 02 QC (9.25 w/ 3.55's) should
be
filled up to the plug?
Thanks!!
ABeerCan@aol.com wrote:
> <<Thanks for the info. the reason I ask is that 2.4 quarts brought it up
to
> the
> fill hole. >>
>
> That is where the fluid level is supposed to be on a differential. With
the
> diff sitting level (or the truck being parked on level ground), fill up
the
> diff until fluid just starts to crown at the fill hole. That should be
> approx how much fluid is needed. HTH
>
> The other Will
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:00 EDT