Well I am thinking the amps can handle it. A few weeks ago It was about 90
degree weather here and I don't know how, but a blanket was placed on top of
my amp (currently just sitting between the rear seat and the side wall) Well
my amp cut out after about 45 minutes of driving, and I thought I had blown
a fuse, nope, the amp got so hot, it burned be when I went to pick it up.
The thermal protection kicked in. I thought I had fried the amp, but after
sitting for awhile (after I got where I was going) the amp had a chance to
cool down and still works fine ! Thats quality engineering.
Marty
""Jim Miller WB5OXQ"" <wb5oxq@clearsource.net> wrote in message
news:00f801c22239$5c21e280$522d9b18@wtx.clearsource.net...
>
> If you cut out foam and mount where only the tops show it may interfere
with
> the cooling of the amps by covering the heat sink fins. It would probably
> look good though.
> ----- Original Message -----
> From: "Got-Speed (Marty)" <Got-Speed@cox.net>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Tuesday, July 02, 2002 9:05 PM
> Subject: DML: Where/how to mount my amps ??
>
>
> >
> > Has anyonemounted their amps on the back seat of their Gen III CC ??
> > I have a ton o' equipment and was thinking of cutting into the foam back
> > seat rest to mount my amps semi flush (just the top sticking out.....)
I
> > have 2 Orion HCCA amps with end links and want to mount them to look
like
> > one long amp. I am running the MTX thunderform, so all that area is
> useless
> > for amps, although I may mount my crossovers in the jack area.
> >
> > I don't want to mount them under the seats, I want to be able to show
off
> my
> > expensive system when I want to. I am not too worried about theives as 1
I
> > live in a good area, and 2 I have 20% tint on my windows.
> >
> > Any ideas here would be helpfull.
> >
> > Thanks
> > Marty
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:00 EDT