For some of the current model trucks, the cap manufacturers sell a
plastic/fiberglass piece that is used to seal up the gap between the cap and
rear of the cab to give a seamless appearance.
-----Original Message-----
From: jkp [mailto:jkp61@horizonview.net]
Sent: Tuesday, July 09, 2002 10:44 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Shell, cover, topper, etc. recommendations.
Chris,
Thanks for the reply, ARE is another one I hadn't heard of, at least not
in caps. The front hinged window does seem like a very useful feature,
usually they have to stay dirty unless you want to remove the cap!
Take Care & Keep On Truckin'~~~~~John
<<'96 Dakota Sport 4x4, 3.9L 5spd>>
----- Original Message -----
From: "CML" <cmlodermeier@yahoo.com>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, July 09, 2002 8:54 AM
Subject: RE: DML: Shell, cover, topper, etc. recommendations.
> John - I have had a ARE Z-series cap for my Quad. It is fiberglass,
> cab-high with tinted windows & has crank-out side windows (not
> sliders). The front window also is hinged to the inside of the cap so
> I can open it to clean & dry the back window of the truck & the front
> window of the cap. Seems to be a pretty useful feature. I have gotten
> quite a few compliments on how well it compliments the truck.
>
> Ed in CA has a snugtop which he seems quite pleased with as well. Let
> me know if you want any more detailed information.
>
>
>
> =====
> Chris
> digest mode
> ---------------
> '01 Silver Quad, 4x4, 4.7L, 3.92sg
> ARE Z-series, Line-X, Z-Tube
>
> __________________________________________________
> Do You Yahoo!?
> Sign up for SBC Yahoo! Dial - First Month Free
> http://sbc.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:01 EDT