Look in the DML FAQs. Andy Levy pointed them out yesterday.
Hold the odometer reset button in while turning the key to ON. After a
quick ODO diagnostic, the needles will all move together to 3 predefined
reference points. This is the "self-check diagnostic" and is outlined
on pages 8E-6 thought 8E-8 of the '99 FSM. The reference points can be
found at
http://www.dakota-truck.net/faq/Electronics/recalibrate_instruments.html
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Kevyn Snary
Sent: Wednesday, July 10, 2002 6:55 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: RE: Gauges - WTH?
Ok I will look stupid but how do you do that
Kevyn Snary
00 RC R/T
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Ronald Wong
Sent: Tuesday, July 09, 2002 8:23 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: Gauges - WTH?
If you do the instrument gauge test it'll show you where the needles
should
be.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Kevyn Snary
Sent: Tuesday, July 09, 2002 7:06 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Gauges - WTH?
I did the gauges in mine.
First does he have the old gauge face I took this and with a few cuts
with a razor blade I made a mount for the Indiglo plate by then super
gluing the two together this keeps the new face in the right position.
Second getting them accurate unfortunately I did this by know what they
were before I started, the only suggestion I have is to disassemble the
dash and while it is apart try running the engine and driving the truck
then adjusting the needles to get it accurate.
Third as to the "sticking" when you push the needles back onto the pins
don't push it all the way just place them so they are snug this stops
the needle from dragging on the face and hence sticking.
Hope this helps
Kevyn Snary
00 RC R/T
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of The Stewarts
Sent: Tuesday, July 09, 2002 6:08 AM
To: dakota-truck@dakota-truck.net
Subject: DML: Gauges - WTH?
OK, my friend isntalled indiglo gauges on my truck. First off, how do I
get
them accurrate, they are wholly inaccurated.
Second, they stick, especially my speedo, how do I fix this?
And finally, just Saturday they've started going out at night leaving
only
the needles glowing, sometimes they come back on, then back off, it's
all
random. WHAT THE HECK?!?!
My friend really messed this stuff up. Please help! LOL
-Ryan
99 DA RC R/T
Going, hell, I don't know, speedo is stuck and the lights are out!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:03 EDT