In a message dated 7/28/02 1:14:43 PM Eastern Daylight Time,
jason.dml@bleazard.net writes:
> On Sun, 28 Jul 2002 00:05:23 -0400, jon wrote:
>
> > What I would probably do is, after drilling the holes and making sure
> > that the box is going to bolt in correctly, remove the bolts, make sure
> > the area is clean, and hit it with some spray paint. (primer, white,
> > whatever).
>
>
Hit them well with a rust preventative primer and *then* paint.
Primer itself is porous and is zero protection by *itself*.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:07 EDT