There isn't a bleed valve on the clutch slave cylinder and the tubes are
crimped on.. It's a "sealed" unit. How would you change the fluid ?
Mopar says to replace the whole unit.
Victor Williams
Marietta, GA
'95 CC,318,5sp,Jacobs ign,Jardine catback,K&N dropin,226k miles
>Date: Wed, 31 Jul 2002 15:05:23 -0700
>From: "kevin reimer" <kwreimer@msn.com>
>Subject: DML: Re: Clutch fluid?
>
>Yes it should be replaced as the brake fluid from time to time, because it
>is brake fluid also, Brake fluid attracts and draws on misture throughout
>time, causing the brake fluid to not meet its boil point.
>- ----- Original Message -----
>From: jay & dana <jay&dana@telus.net>
>To: DML <dakota-truck@dakota-truck.net>
>Sent: Tuesday, July 30, 2002 4:53 PM
>Subject: DML: Clutch fluid?
>
> Someone told me today that you should also replace the clutch fluid in
the
> little container on the fire wall for the NV3500 5 speed just as you
would
> replace brake fluid. Is this B.S. or is there something to this?
> I doubt it but ...
>
> TIA
> ~Jay
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:11 EDT