That'd be right. 7-8 means between 7 and 8 mm and 8.5 is bigger than that!
DUH! ;-) Sorry Andy, couldn't help myself.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of andy levy
Sent: Thursday, August 08, 2002 2:39 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Spark Plug Rewire
I got them from Summit when I ordered the wires. Make sure you get the
10mm vertical looms though; the 7-8mm ones MUST be drilled out unless
you want a complete headache putting the wires in them.
Dave wrote:
> Where did you get your looms? I need to get some red ones. Thanks
>
> -Dave
>
> "andy levy" <andylevy@yahoo.com> wrote in message
> news:aitn23$b0b$1@bent.twistedbits.net...
>
>>Yeah, the 8.5s. He watched me install the Made4You looms on my set of
>>MSDs but opted to stick with the stock ones.
>>
>>Dave wrote:
>>
>>>8.5mm? Cause I couldn't get mine to fit, maybe if I pushed them in
>>
> there
>
>>>really hard, but didn't want to mess them up, they'll be fine till I can
>>
> get
>
>>>some custom red looms.
>>>
>>>--
>>>Dave
>>>Bensalem, PA
>>>'02 R/T RC Flame Red
>>>
>>>"andy levy" <andylevy@yahoo.com> wrote in message
>>>news:ais4a3$vpq$2@bent.twistedbits.net...
>>>
>>>
>>>>Don't ask me how (won't see it till next week), but my brother made the
>>>>MSDs fit in the stock looms on my father's Durango.
>>>>
>>>>Ronald Wong wrote:
>>>>
>>>>
>>>>>I use those and have had no problems. You'll have to buy a separate
>>>>
> set
>
>>>of
>>>
>>>
>>>>>guides as the stock ones that are bolted to the valve covers won't
>>>>
> work.
>
>>>>>Ron
>>>>>00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
>>>>>For modifications see my DML Profile (URL follows)
>>>>>http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>>>>
>>>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:12 EDT