If I recall correctly, I only paid about $250 for my C-force II. Check out
this webpage.
https://www.truckperformance.com/products/?searchtype=234d&sortorder=DAA&url
subcategory=Drivetrain&productcategory=Clutches&brandname=CENTERFORCE&sf1=DO
DGE
This is stepped down through the Truck Performance website. All you need to
do is select you model year. Only thing to watch is you cannot just order a
pressure plate. Centerforce changed this policy several months ago. You
need to order the entire clutch. Call them to verify the price. Hope this
helps.
Rich - Ashburn, VA
-----Original Message-----
From: victor.williams@byers.com [mailto:victor.williams@byers.com]
Sent: Monday, August 12, 2002 7:35 PM
To: dml@dakota-truck.net
Cc: acellan1@tampabay.rr.com
Subject: re:DML: Re: Centerforce Clutch
Is it good for towing ?
I guess launching with 4500+ lbs hanging from the back of the truck is
pretty rough too. Only time I got one to slip was backing up a hill
pushing the trailer. But then again with such a low first gear on the
NV3500 it just grabs and goes.
$394 for the Centerforce I $420 for Centerforce II seems a lot for a
clutch. I'm getting 100k+ miles from each stock clutch, do these last ?
Victor Williams
Marietta, GA
'95 CC Sport,318,5sp,Jacobs ign,Jardine catback,K&N dropin,226k miles
>Date: Mon, 12 Aug 2002 00:19:38 -0400
>From: "Tony Cellana" <acellan1@tampabay.rr.com>
>Subject: DML: Re: Centerforce Clutch
>
>Great clutch IMO. Strong enough to bend leaf springs when lauching from
>4500 rpms with a 5.2 ;-)
>TonyC
>
>- -----Original Message-----
>>From: GSWillhite <GSWillhite@ualr.edu>
>>To: DML <dakota-truck@dakota-truck.net>
>>Date: Friday, August 09, 2002 11:07 AM
>>Subject: DML: Centerforce Clutch
>>
>>Are there any DML'ers running a Centerforce type clutch? I'm considering
>>installing one or a dual friction type. Any opinions, experience with
these?
>>I'll check the archives as well, thanks!
>>
>>George
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:13 EDT