Damn, that musta been K-mart stock LOL
Marty
http://members.cox.net/got-speed
"Stlaurent Mr Steven" <STLAURENTS@MCTSSA.USMC.MIL> wrote in message
news:5F7587961057D211ABE9004095102F7803C5AB90@ex.mctssa.usmc.mil...
>
> Forget the stock market. I watch a 375,000 gain go to a measly 85,000.00.
>
> I have the original dyno run with the following items:
>
> 2000 4.7ltr Extended Cab 2wdr (3.55:1 ratio drive)
>
> added mods: Bosh 4 plus
> 68mm TB (F&B beta 1st test)
> Z Tube (7 inch cone)
> 180 degree thermostat
> Jet Stage II
>
> 218 RWHP
> 272 RWTQ (cut off was 97MPH due to Dodge
> Chip)
>
> If you like a copy, I will forward it to you.
>
>
> --------------------------------------
> Steven St.Laurent
> C4i System Engineer
> C4i Engineering Branch, PSD, MCTSSA
> MARCORSYSCOM, U.S. Marine Corps
> Office (760) 725-2506 (DSN Prefix: 365)
> "Never be content with somebody else definition
> of you. Instead, define yourself by your own beliefs,
> your own truths, your own understanding of who
> you are. Never be content until you are happy with
> the unique person GOD has created you to be."
>
> -----Original Message-----
> From: crm [mailto:tb.crm@verizon.net]
> Sent: Tuesday, August 13, 2002 7:44 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re: RE: Re: RE: Re: Jet chip
>
>
> steven, what were the gains on the dyno?
>
> the only reason i am starting to think of this again is that my
> cams/intake/flash money is now tied up in a stock market that seems to
have
> an aversion to me getting my mods. i might be willing to chance it if i
can
> find a used one (stage 2).
>
> thanks,
>
> -adam
> ----- Original Message -----
> From: "Stlaurent Mr Steven" <STLAURENTS@MCTSSA.USMC.MIL>
> To: <dakota-truck@dakota-truck.net>
> Sent: Tuesday, August 13, 2002 8:43 AM
> Subject: DML: RE: Re: RE: Re: Jet chip
>
>
> >
> > Been there all ready. I had a stage II and had no problems but
experience
> > as advertised. It was tested on a dyno machine, along with Bruce's 1st
> beta
> > TB unit.
> >
> > --------------------------------------
> > Steven St.Laurent
> > C4i System Engineer
> > C4i Engineering Branch, PSD, MCTSSA
> > MARCORSYSCOM, U.S. Marine Corps
> > Office (760) 725-2506 (DSN Prefix: 365)
> > "Never be content with somebody else definition
> > of you. Instead, define yourself by your own beliefs,
> > your own truths, your own understanding of who
> > you are. Never be content until you are happy with
> > the unique person GOD has created you to be."
> >
> > -----Original Message-----
> > From: crm [mailto:tb.crm@verizon.net]
> > Sent: Monday, August 12, 2002 5:30 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: DML: Re: RE: Re: Jet chip
> >
> >
> > what about the stage 2 for the 4.7's? too much conflicting information ,
> but
> > most from people that havent actually used/tested one...
> >
> > -adam
> >
> > ----- Original Message -----
> > From: "Bernd D. Ratsch" <bernd@texas.net>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Monday, August 12, 2002 6:10 PM
> > Subject: DML: RE: Re: Jet chip
> >
> >
> > >
> > > Jet Stage-II works well on the V6...and is the only "easy to install"
> > > option...unless you go with custom programming.
> > >
> > > - Bernd
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@dakota-truck.net
> > > [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Canucker
> > > Trucker
> > > Sent: Monday, August 12, 2002 2:40 PM
> > > To: dakota-truck-moderator@bent.twistedbits.net
> > > Subject: DML: Re: Jet chip
> > >
> > >
> > >
> > > you could check your local dumpster because I think most people who
have
> > > bought one ended up throwing them out.
> > >
> > > I've never actually bought one, but I hear they don't really work. If
> > > you still want one though, you may find one here, or try posting a
> > > classified ad on the net somewhere (Dodgedakotas.com?).
> > >
> > > thats my $.02
> > >
> > > --
> > > Canuck
> > > --------------------------------------------
> > > Y2K, 4.7L, 2wd, 5spd, The Ultimate K&N HomeBrew, Flowmaster CatBack,
> > > Home Ported TB
> > > http://www.twistedbits.net/WWWProfile/dakota/Vyikam1jjgNN6
> > >
> > >
> > > "Curt Kitts" <cwkitts@prodigy.net> wrote in message
> > > news:4.2.0.58.20020812162525.00979650@pop.prodigy.net...
> > > >
> > > > Anyone know where i can get a stage 2 jet chip for a 2002 3.9l v-6
> > > > auto. Anyone on the list have one they want to get rid of? Dont want
> > > > to pay full price, if i can help it. We on a budjet here.
> > >
> > >
> > >
> > >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:14 EDT