It's for the 45RFE found in the 4.7L automatics ("Multi-Speed"
automatic).
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Donald Mallett
Sent: Wednesday, August 14, 2002 7:41 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Re: ATF +3
Bernd, When you listed the "Oil Pan Gasket - 5013681AA" is this for the
45RFE? or for the 4.7L?
In article <000001c24354$cf19e5d0$090aa8c0@homenet.com> ,
bernd@texas.net ("Bernd D. Ratsch") wrote:
>
> 4.7L = 45RFE (2000+ models use ATF+4)
>
> There's also two filters:
>
> Internal - 5013470AA
> External - 4799662
>
> Oil Pan Gasket - 5013681AA
>
> - Bernd
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Gary Hedlin
> Sent: Tuesday, August 13, 2002 10:19 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: ATF +3
>
>
>
> Yes, the ATF+3 is a good choice. Also, you'll need about 6 quarts
> when you change the filter.
>
> P.S. Do not buy your gasket & filter from Autozone. They fold them
> into a little box, and their a pain to put on. Napa and CarQuest lay
> them flat, much easier to put on.
>
>
> Gary Hedlin
>
>
> ""T Simmons"" <trsimmons7@alltel.net> wrote in message
>
>> Alright guys...
>>
>> It is well and good past time to change the filter and fluid in
>> my
>
>> 'multispeed' automatic. I have read that I need to use ATF +3. Is
>> this
> still
>> a good choice and how much should I expect to lose when I change the
>> filter??
>>
>>
>> Travis
>>
>> Y2K Dak ext. cab 4.7 L
>
>
Donald Mallett
Director
Independent Associate
4525 Drake Lane Suite 912
Fort Worth, TX 76137-6103
817 847-9497 Office
817 791-7052 Cell
Mallett@prepaidlegal.com
*----You have no rights if you don't know your rights...------*
http://www.prepaildlegal.com/go/mallett
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:14 EDT