So just some carwash mixed in a spray bottle, so I can keep spraying it as I
go along? I just wish I had a garage to do it in, gonna be a pain trying to
do all those coats, since I'll have to do it over several days, don't want
it sitting in the sun when I do it, so I figure a coat each evening after
the sun goes down.
-- Dave Bensalem, PA '02 R/T RC Flame Red""Sevrence, Sean (S.J.)"" <ssevrenc@visteon.com> wrote in message news:FE3EEB4D4A75D3118E0B00A0C9CCEF7F0F90EFCA@vistex08.vcs.visteon.com... > > Hey Dave! > > Good question, but I would not use water alone. The purpose of the clay > material is to pull off all of the airborne contaminates that are embedded > in your paint (brake dust, rail dust, over spray, etc.). Because of this, > the clay could scratch the clear coat of it is not lubricated. Water is just > too thin. Look at it this way, if you take a couple drops of water on your > finger and rub your fingers together, it doesn't take long for the water to > be displaced and your fingers are then rubbing together. Repeat that > scenario with a drop of soap. You see the point. I guess you could use > water, but you would have to keep the hose running while you are doing it. > It still scares me though. > > Best of luck! I know you'll enjoy the results! > Sean > '92 RC Sport 3.9L 5spd - 256,000mi! > '01 CC SLT+ 4.7L 5spd 3.92 LSD Mobil-1 - 51,500mi! > http://www.twistedbits.net/WWWProfile/dakota/DnuuSncssJujU > > > -----Original Message----- > From: Dave [mailto:ded74@yahoo.com] > Sent: Wednesday, August 14, 2002 10:20 AM > To: dakota-truck-moderator@bent.twistedbits.net > Subject: Re: DML: clay bar > > > > I just got my Zaino order in the mail the other day, haven't had time yet to > start doing it. I have a question about the clay bar, it says to lubricate > it with car wash, can I just use water? I've never used a clay bar before, > but I want to do the whole process and keep her looking like new, or even > better than new. > > -- > Dave > Bensalem, PA > '02 R/T RC Flame Red > > ""Sevrence, Sean (S.J.)"" <ssevrenc@visteon.com> wrote in message > news:FE3EEB4D4A75D3118E0B00A0C9CCEF7F0F90EFC7@vistex08.vcs.visteon.com... > > > > Hey Eric! > > > > I have to agree with Raymond, Zaino is what I use also along with a bunch > of > > guys I work with. All of which have converted from other products > including > > McGuire's. Go to http://www.zainobros.com to check it out. > > > > Sean > > '92 RC Sport 3.9L 5spd - 256,000mi! > > '01 CC SLT+ 4.7L 5spd 3.92 LSD Mobil-1 - 51,500mi! > > http://www.twistedbits.net/WWWProfile/dakota/DnuuSncssJujU > > > > > > -----Original Message----- > > From: raymond.irons@gm.com [mailto:raymond.irons@gm.com] > > Sent: Wednesday, August 14, 2002 6:14 AM > > To: dakota-truck@dakota-truck.net > > Subject: Re: DML: clay bar > > > > > > > > > > Zaino >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:14 EDT