How is Woodview's quality and fit? They have the full stainless kit for
$270. Wooddash.com has a full brushed aluminum kit for $227, but they don't
have any pictures. How can you sell a product online and not have pictures
of it???
-- Dave Bensalem, PA '02 R/T RC Flame Red http://www.twistedbits.net/WWWProfile/dakota/Ob4o9sCNwrxqM/""Marty Nowak (Got-Speed)"" <got-speed@cox.net> wrote in message news:ak7qp8$6n4$1@bent.twistedbits.net... > > Its a woodview moulded cover. I beleive it retails for around $350. I > *might* want to sell it, but it depends on how the doors look when I finish > the passenger side. I might just want them to all be the same, but I don't > know yet. > > Marty > http://members.cox.net/got-speed > > > ""Dave"" <ded74@yahoo.com> wrote in message > news:ak6nh1$643$1@bent.twistedbits.net... > > > > Hmmm, if you can get me some decent pics of them, I might be interested. > I > > really like the brushed aluminum accents, what company makes the dash > cover? > > > > -- > > Dave > > Bensalem, PA > > '02 R/T RC Flame Red > > http://www.twistedbits.net/WWWProfile/dakota/Ob4o9sCNwrxqM/ > > > > ""Got-Speed (Marty)"" <Got-Speed@cox.net> wrote in message > > news:ak6kgo$3sh$1@bent.twistedbits.net... > > > > > > Dave, > > > I don't have any good readily available pics, and its too dark out right > > now > > > to take some. I got it on ebay for something like $115 with 2 door > handle > > > covers and the cup holder cover. If you want I will sell you the 2 door > > > handle covers and the cup holder cover for $20. I have no use for em > since > > I > > > painted my doors, and I don't have the cup holder. > > > > > > Marty > > > > > > > > > ""Dave"" <ded74@yahoo.com> wrote in message > > > news:ak6jj4$398$1@bent.twistedbits.net... > > > > > > > > Marty, > > > > > > > > Do you have any pics of the aluminum dash cover? And where did > you > > > get > > > > it, I've been looking for one. Thanks. > > > > > > > > -- > > > > Dave > > > > Bensalem, PA > > > > '02 R/T RC Flame Red > > > > http://www.twistedbits.net/WWWProfile/dakota/Ob4o9sCNwrxqM/ > > > > > > > > ""Got-Speed (Marty)"" <Got-Speed@cox.net> wrote in message > > > > news:ak6hr0$a6t$1@bent.twistedbits.net... > > > > > > > > > > Yesterday I started hooking up my power rear quarter windows to the > > new > > > > > durango window switch. I had to cut the door panel hole larger for > the > > > > > larger switch / bezel assy. What I ended up with was a a big gaping > > hole > > > > > around the switch bezel ! Needless to say I was not too pleased. I > was > > > > > hoping at first to fill the gap with some poxy putty (which would > also > > > > help > > > > > hole it in place) from the back and by using a black magic marker > > > coloring > > > > > it black. Well that didn't look so kosher either. This morning I got > > the > > > > > bright idea to mold it into the door from the outside. After doing > > that, > > > > > there were no more holes/gaps and the bezel was not going anywhere. > A > > > > friend > > > > > of mine was kidding around yesterday and said to paint it. Well I > > > figured > > > > > what better way to make it look stock (again) then to cover the > bezel > > > and > > > > > putty with paint ! What I have ended up with now is nothing short of > > > > > amazing. I removed the armrest and latch assy from the door panel > and > > > > taped > > > > > off the area I wanted to paint (of course I had allready sanded from > > the > > > > > putty eariler) and voila ! A nice looking door peice ! I have a > > moulded > > > > > aluminum dash cover so I painted the doors and the latch bezel > silver > > > via > > > > > duplicolor. If anyone wants to see pics, I have some of the during > > > stages. > > > > > The final paint is still drying right now. I don't think I can > attach > > > them > > > > > to this thread. Sorry to be so long winded, but i'm pretty stoked. > > > > > > > > > > Marty > > > > > http://members.cox.net/got-speed > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:16 EDT