Re: Engine/HO Cams Help/Questions

From: Jon N. Benignus (blkwidow1@primary.net)
Date: Tue Sep 03 2002 - 07:33:49 EDT

Next message: Bernd D. Ratsch: "RE: Engine/HO Cams Help/Questions"
Previous message: Tom \: "Re: swapping a 5.2 for a 4.7 or 4.7HO"
In reply to: William H. Hiatt III: "Engine/HO Cams Help/Questions"
Next in thread: Bernd D. Ratsch: "RE: Engine/HO Cams Help/Questions"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

If you have valve spring noise, you have a severe problem. If, in fact, it
is valve springs making the noise, it sounds as if the springs are too long
and are binding. You did increase the lift when you swapped the cams,
correct?

Jon
STL MO

Next message: Bernd D. Ratsch: "RE: Engine/HO Cams Help/Questions"
Previous message: Tom \: "Re: swapping a 5.2 for a 4.7 or 4.7HO"
In reply to: William H. Hiatt III: "Engine/HO Cams Help/Questions"
Next in thread: Bernd D. Ratsch: "RE: Engine/HO Cams Help/Questions"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:19 EDT