Must be reverse flow!!! Look at the way your belt moves on it.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Edward
Falsename
Sent: Tuesday, September 03, 2002 11:15 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: flowkooler water pump install
hey, the spec sheet says this thing is "reverse flow"
i dont think the stock one is reverse flow. is it supposed to be reverse?
does that mean i will have to do some modding to un-reverse it, or can it be
installed and work that way?
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Edward
Falsename
Sent: Saturday, August 31, 2002 9:58 PM
To: dakota-truck@dakota-truck.net
Subject: DML: flowkooler water pump install
My 99 RC 3.9L V6 auto is leaking fluid out of the weep hole at the water
pump...with only 20000 miles!!!
Im going to splurge on this luxury (flowkooler part 1760) item and do
the
install myself. My question is: 1. Needed to verify the part number
above 2.
will i need to make any modifications during this installation or is
this
just a simple "remove-the-old-bolt-on-the-new" install? and 3. Should i
go
ahead and change the thermostat to a 180 while im taking the thing
apart?
thanks
msnbcnnbcbs
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:19 EDT