I've got them on my 2k w/ no probs either.
--Patrick Delgado
2000 FR RC R/T; 9 psi Powerdyne w/ 7-rib pulley, Gatorback belt, F&B stage I
TB, TV cable adj., Homebrewed K&N 0920 behind foglight, MAP boost bypass,
IAT relocation, MSDBTM, MSD 8.5 superconductors, 3923's, MP computer, NO
CAT, katbox, full Hotchkis kit, Bilsteins, 275/50 nittos and 305/45 BFG's,
powerslots/QS pads, Jason cap. In possession but not in position; Belly pan
plate and traction bars.
==============================================================
> From: "Ronald Wong" <ron-wong@cox.net>
> Reply-To: dakota-truck@dakota-truck.net
> Date: Sun, 15 Sep 2002 12:03:59 -0700
> To: <dakota-truck@dakota-truck.net>
> Subject: DML: RE: MSD Wires
>
>
> The connector angles are different. That's about it. I use the 32189 ones
> on mine and they work just fine. As a matter of fact, when I got mine they
> didn't even have the 32979's yet.
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Gmblows@aol.com
> Sent: Sunday, September 15, 2002 10:28 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: MSD Wires
>
>
>
> Anyone know the difference between;
> P# 32189 '94-'97 Super Conductor 8.5mm
> P# 32979 '97-'00 Vari angle Super Conductor 8.5mm
> The later ones are $25 more.
> TIA
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:21 EDT