Yup, thats what the scan tool came up with, I just dropped the p0 part,
actually he had come up with 138 also last week...
but the Dash won't pull up ANYTHING but a 12 now????
Tony.
----- Original Message -----
From: <jon@dakota-truck.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Tuesday, September 17, 2002 12:55 PM
Subject: Re: DML: '97 2.5L codes
>
> "Tony Troidl" <ttroidl@bluefrognet.net> wrote:
>
> : Does anyone know what code 148 and 8 are????
>
> : They are not listed in my manual?
>
> : and any idea why I can't pull codes up on my dash anymore? all I get is
12,
> : even after I had replaced my PCM last month, and it has been reset by
the
> : dealer...
>
> : AutoZone pulled up 148 and code 8 ???
>
> : he had NO idea what it was...
>
> : I just replaced both o2 sensors but the engine lite came on again with
> : thease codes now????
>
> : HELP!!!!
>
>
>
>
>
> Those don't even sound like valid codes. The "key on-off" method of
> retrieving codes results in 2 digit codes, and an OBD-II scan tool should
> pull 5 digit codes. I thought perhaps that's what those were, i.e. P0148
> and P0008, but those codes don't appear to exist either.
>
>
>
> --
>
> -Jon-
>
> .---- Jon Steiger ------ jon@dakota-truck.net or
jon@jonsteiger.com -----.
> | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL
|
> | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly
|
> `-----------------------------------------
http://www.jonsteiger.com ----'
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:21 EDT