Well I figured, the spare would be the least of my worries. There are plenty
of good shops here that can route the exhaust around it. I admit it would be
really tight tho. Worst case, I could always relocate the spare to the bed
under the tonneau.
I am more concerned about the trailer hitch. I want a hidden hitch, but it
*seems* that it would be in the way of the exhaust, in other words the hitch
(bar between the frame rails) would be right where my holes are in the
rollpan. Not good. Now if I could find one that was above or below the
exhaust holes I would be happy, but so far I have not found any detailed
specs on the internet, nor anyone who has done this.
I do like your rollpan Kevin, was that all custom, or was it a kit of some
sort ??
Marty
http://members.cox.net/got-speed
""MAGNUM S/T"" <khoegen@charter.net> wrote in message
news:amiui3$9kt$1@bent.twistedbits.net...
>
> Yup I know your ride Marty :-)
>
> Figured if I was going thru the trouble I might figure a way of doing it.
> I'm just unsure how close you can run the exhaust to the spare...unless
you
> want to put the spare somewhere else??? Then I guess this would be much
less
> of an issue
> ""Marty Nowak (Got-Speed)"" <got-speed@cox.net> wrote in message
> news:amiqqm$73v$1@bent.twistedbits.net...
> >
> > Kevin,
> > I can get you a gibson muffler for about $60, single inlet, dual outlet.
I
> > have more than one if anyone is interested. Also single in, single out.
> > These are from complete catback systems, but I can easily sell the
> mufflers
> > and ditch the piping (not to worry the piping is for fords and chevys)
> > Look at my ebay auctions under the name got-speed
> > Anyway I also want to know about the dual exhaust and trailer hitch
thing,
> I
> > have a holy rolly roll pan similar to yours (mines round exhaust
cut-outs)
> > and have been waiting to do the exhaust to see weather or not I can use
a
> > hidden hitch. Look at my webpage under my signature to see what I mean.
> >
> > Marty
> > http://members.cox.net/got-speed
> >
> >
> >
> >
> > ""MAGNUM S/T"" <khoegen@charter.net> wrote in message
> > news:amipm6$6db$1@bent.twistedbits.net...
> > >
> > > Hey guys,
> > >
> > > As I posted earlier, my exhaust tips rotted away, so I am getting
> > stainless
> > > ones if I can find the right ones (Dual Euro type). I may also have to
> > > replace the pipe as well as it don't look so hot.
> > >
> > > Is there anyone out there who has Dual rear exhaust AND a trailer
hitch?
> > If
> > > the guy does replace the pipes, I'm wondering if it is indeed possible
> > > (doesn't look it from where I can see).
> > >
> > > Later
> > >
> > > BTW: My flowmaster 50 series isn't lookin so hot either...and it's
only
> 2
> > > years old??
> > >
> > > --
> > > Kevin
> > > http://webpages.charter.net/khoegen
> > > Home of the "MAGNUM S/T"
> > >
> > >
> > >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:23 EDT