Hi Dave,
Yes, I am, and have had no problem with them. Of course, I have not tried
to set them on my header after a run down the street either. ;-) As far as
the valve covers and such, there has not been a melting problem.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Dave
Downing
Sent: Wednesday, September 25, 2002 5:26 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: RE: Wire looms
Are you using these Ron? I heard from a couple of R/T guys that have had
these melt on them, which is why I went with the R&M billet looms. Just
curious.
-- Dave Bensalem, PA '02 R/T RC Flame Red http://www.dragtruk.com/ENTRIES/KECEE245JCKM.html""Ronald Wong"" <ron-wong@cox.net> wrote in message news:NDBBIHDGKKJOIJDEOCBMMEAHGAAA.ron-wong@cox.net... > > The company that makes them is Made 4 You. Their website is: > http://www.made4uproducts.com/ > > Ron > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD > For modifications see my DML Profile (URL follows) > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY > > > -----Original Message----- > From: owner-dakota-truck@bent.twistedbits.net > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Charlie > Boatwright > Sent: Tuesday, September 24, 2002 3:48 PM > To: dakota-truck@dakota-truck.net > Subject: DML: Wire looms > > > > Anyone know a good place to get wire looms for 8.5 plug wires? I want a set > of black ones if I have an option. > -- > __________________________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:24 EDT