Alright, thanks Mike.
> I have the same config truck as you, but I'm not running the stock
> size
> tire. I'll get you a measurement tommorow (corrected) if no one
> else beats
> me to it.
>
> mm
> ----- Original Message -----
> From: "Matthew Intihar" <challengerman@juno.com>
> To: <dakota-truck@dakota-truck.net>
> Sent: Friday, September 27, 2002 4:23 PM
> Subject: DML: GenII 2WD Suspension(HELP)
>
>
> >
> > I just got the front coil spring spacers removed from my '92, and
> the
> > shop installed new coils. My question is how much room should be
> between
> > the lower control arm bump stop and the frame? As it stands, I
> can only
> > get my pointer finger between it and the frame; I'm thinking there
> should
> > be more room for travel than that. Plus, could someone measure
> the
> > distance from the ground to the bottom of the fender flare in the
> middle
> > of the wheel well for me?
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:25 EDT