I have the same config truck as you, but I'm not running the stock size
tire. I'll get you a measurement tommorow (corrected) if no one else beats
me to it.
mm
----- Original Message -----
From: "Matthew Intihar" <challengerman@juno.com>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, September 27, 2002 4:23 PM
Subject: DML: GenII 2WD Suspension(HELP)
>
> I just got the front coil spring spacers removed from my '92, and the
> shop installed new coils. My question is how much room should be between
> the lower control arm bump stop and the frame? As it stands, I can only
> get my pointer finger between it and the frame; I'm thinking there should
> be more room for travel than that. Plus, could someone measure the
> distance from the ground to the bottom of the fender flare in the middle
> of the wheel well for me? I'm completely confused right now, so thanks
> for any input. Oh, and the part number for the coils they ordered was
> 2775244, but I can't find it anywhere on the internet. TIA!
>
> Matt
> '92 CC 3.9L 4x2 auto
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:24 EDT