Re[3]: Headers

From: Michael Clark (dml@mikesdakota.com)
Date: Mon Sep 30 2002 - 14:51:24 EDT


Sam has been a member on here since wayyyy back. and
he's been a big help to me over the years. I've never
noticed him going out of his way to piss someone off.
I really don't think he meant anything by his post.

--Mike
www.mikesdakota.com

> Hey Ray... No need to jump my ass about it, no need to flame out. Never saw the original post! Take it for what it's worth. Glad you enjoy your headers-- the Gibsons are a good choice too. I
> got my PPH coated as well-- highly recommend coating!

> Relax--- take a deep breath-- GEEZ.

> Nice truck BTW-- It would be a good race against you NA with my 13.98 @ 98... Got a few more tricks to try (NA) to get it down in the 13.6 range.

> Sam
> http://www.dragtruk.com/ENTRIES/TD8P0A63WS3K.html

>>
>> From: "Ray" <bpracing@worldnet.att.net>
>> Date: 2002/09/30 Mon PM 12:22:43 EDT
>> To: <dakota-truck@dakota-truck.net>
>> Subject: RE: RE: DML: Headers
>>
>>
>>
>> > -----Original Message-----
>> > From: owner-dakota-truck@bent.twistedbits.net
>> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of srp@cox.net
>> > Sent: Monday, September 30, 2002 11:35 AM
>> >
>> > Gibson's aren't Doug Thorley-- unless they are long tube, Tri-Y design...
>>
>> > >
>> > > From: "Ray" <bpracing@worldnet.att.net>
>> > > I bought the Gibson (chrome, a.k.a. Doug Thorley) headers many
>> > years ago and
>> > > had them stripped at a local plating shop. <snip>
>> > > Ray
>>
>> To srp@cox.net - If you don't have something constructive to contribute,
>> stay out of the conversation.
>>
>> number one, your comment is not relevant to the original question which
>> concerned header coatings.
>>
>> number two, my reply stated they were bought many years ago, at which time
>> Gibson told me they were made for them by Doug Thorley because I was trying
>> to get them without the chrome plating. Thorley told me they couldn't send
>> me unplated ones because they made the magnum v8 headers only for Gibson at
>> that time and Gibson wanted them chrome plated.
>>
>> I hope this ends here.
>> My apologies to the rest of the list.
>>
>> Ray
>> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>>
>>
>>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:25 EDT