On the exhaust pipe they welded a 3" collector plate with a cover. When
you take the 3 bolts off you have a straight pipe. It dumps the exhaust
right under the rear seat on my truck. When you put the collector plate
and gasket back on your running your street pipes. The other one was an
electric version so you don't have to climb under the truck every time
you open the exhaust dump. Easy way to go from legal to wide open and
back for small money.
Mike
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Gerald
Harnage
Sent: Tuesday, October 01, 2002 6:33 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: FW: [dakotart] Quicktime Electric cutout(best)
What exactly is the purpose of an exhaust dump or cut out?
----- Original Message -----
From: "Patrick Delgado" <dadoctah@vitelcom.net>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, October 01, 2002 6:42 AM
Subject: DML: FW: [dakotart] Quicktime Electric cutout(best)
>
> Mike,
> Here's something from the R/T group on the electric cut-outs. No
persenal
> experience.
>
> --Patrick Delgado
> 2000 FR RC R/T; 9 psi Powerdyne w/ 7-rib pulley, Gatorback belt, F&B
stage
I
> TB, TV cable adj., Homebrewed K&N 0920 behind foglight, MAP boost
bypass,
> IAT relocation, MSDBTM, MSD 8.5 superconductors, 3923's, MP computer,
NO
> CAT, katbox, full Hotchkis kit, Bilsteins, 275/50 nittos and 305/45
BFG's,
> powerslots/QS pads, Jason cap. In possession but not in position;
Belly
pan
> plate and traction bars.
> ==============================================================
> ----------
> > From: dakotart2000 <dakotart2000@cox.net>
> > Reply-To: dakotart@yahoogroups.com
> > Date: Mon, 29 Apr 2002 19:06:30 -0700
> > To: dakotart@yahoogroups.com
> > Subject: Re: [dakotart] Quicktime Electric cutout(best)
> >
> > According to the MAJOR cutout users (camaro and firebird guys) this
link
below
> > is the
> > BEST availible , wont rust , SEALS COMPLETLY , wont leak , with out
a
doubt
> > the best unit
> > availible , enjoy....
> >
> > http://dmhperfproducts.homestead.com/borlaplate.html
> >
> > BH-R/T
> >
> > KatzkinLeather@aol.com wrote:
> >
> >> Ok.. where can you get an electric cutout?
> >>
> >> Which ones are best.. how much?
> >>
> >> Jonas
> >>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:15 EST