Re: A few 4.56 gears Qs.

From: Tony Cellana (acellan1@tampabay.rr.com)
Date: Thu Oct 17 2002 - 11:51:56 EDT


Bob,

My 99 R/T has a set of 4.10s and I use the 26 ET Streets on the track. MPH
through the traps is right at 100, and my rpms are around 5400.

Effective gear ratio as compared to a 3.92 with 28" tall is a 4.42:1.
Another possible option.

I'm not sure about the 4.56 into an 8.25 though.

TonyC

-----Original Message-----
From: Bob Tom <tigers@bserv.com>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Thursday, October 17, 2002 11:18 AM
Subject: Re: DML: A few 4.56 gears Qs.

>
>At 02:42 PM 10/17/02 +0000, you wrote:
>> As far as the muscle cars at 3,000rpm at 70 go, the cuda runs
>>3,000rpm at about 55mph with 3.91s - maybe I need a taller tire. :-)
>>I actually looked into trying to find a third member with a 2.73 or
>>something along those lines until I saw the $900 price tag. Could always
>>go the Gear Vendors OD route, but that's $2,000. Oh well, I guess I'll
>>just have to buzz around locally and keep it off the highway. -Jon-
>
>Thanks. My very rough calculations were about the same.
>
>I forgot to mention that my 70 Duster 340and 71 RR 340 (big SOBS :-))
>both had the 3.23 gear.
>
>ticats
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:17 EST