Hey, punch,
<snip> know the drill, whats the hammer for?<snip>
Just in case you can't turn the caliper bolts with whatever hex driver
you're using. A couple of raps with a dead-blow
or a brass or lead hammer will loosen them without taking a chance on
sending any shrapnel flying...A ball peen or any other steel hammer might
shatter your driver (or the hammer face, for that matter)...
Either way you do it, wear safety glasses or goggles...
HTH,
Bob Smith (DAKSY2K on AIM)
Averill Park, NY
2K DAK SY Sport + V6 4X4 5 Speed
WebPage URL: http://home.nycap.rr.com/daksy/
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:24 EST