DAKSY wrote:
> Hey, punch,
>
> <snip> know the drill, whats the hammer for?<snip>
>
> Just in case you can't turn the caliper bolts with whatever hex driver
> you're using. A couple of raps with a dead-blow
> or a brass or lead hammer will loosen them without taking a chance on
> sending any shrapnel flying...A ball peen or any other steel hammer might
> shatter your driver (or the hammer face, for that matter)...
> Either way you do it, wear safety glasses or goggles...
> HTH,
>
> Bob Smith (DAKSY2K on AIM)
When all else fails...try a bigger hammer.
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:24 EST