Ahhh there is two ways, you can dump all the fluid out of the converter, (you
have to pull the trans back about a foot, and un hook it from the plate. Or you
can spend alot of money and get a fluid pump. For those you pump fluid in
through the cooler lines until you get clean fluid commin back. Maybe a shop
will have one you can use.
I always just dumped the converter because I'm poor. :|
Danny
"Mallett, Donald B" wrote:
> OK, after pulling the pan, is there anyway to get more of the ATF fluid out
> safely(with out damaging the tranny? This is on a 45RFE.
>
> --
> *------------------------------Y2KOTA------------------------------*
> Don Mallett
> Y2K QC 4.7L Auto SLT+
> http://Geocities.com/maldbnsf/
> http://www.dakota-truck.net/profiles/dakota/QwkvWz@DAJFf6/profile.htm
> *-------Every minute in your Dodge is a minute worth living.-------*
>
> http://FindFreedom.com/mallett
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:24 EST