My Viper fan requires a 50 amp fuse or circuit breaker.
Also a 2 speed 4000 cfm unit.
TonyC
-----Original Message-----
From: gswillhite@ualr.edu <gswillhite@ualr.edu>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Tuesday, November 05, 2002 1:26 AM
Subject: DML: Re: New Fan
110 AMPS?!?!! Daaammn! I don't want a propeller driven dak ;)
I could use the 4000 CFM though!
George
>>>>>>>>>>>>>>>
From: "John Neff" <jndneff@texas.net>
Subject: RE: DML: New Fan
The Flex-a-lite BM 150 moves 2800 CFM, but isn't enough for the 5.2 or
5.9L
engines in stop and go traffic in the summer. If you want a serious electric
fan, look at the fan out of the Lincoln Mk VIII. It moves 4000 CFM, draws
110 amps at start up, and will blow the Hayden fan control modules.
Nominal
load is 30 amps.
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:24 EST