Magnum head bolts?

From: Jon (jon@dakota-truck.net)
Date: Tue Nov 05 2002 - 19:03:59 EST


   Just wondering if someone could tell me what I need to bolt my heads
back on - '92 318 Magnum. There are 10 bolts per head, 5 short and 5 long.

  I found a Mopar part number, 4876759 which is listed as a "head bolt kit,
Magnum V8, Bolts/Washers" on Summit's web site, but they don't have a picture
or anything. The price is about $18, which seems a bit cheaper than
I was expecting.

   Is this the correct part number that I need? If so, is this enough
bolts for both heads or just one?

  I would also be willing to look at other options (ARP, etc.), but I
want to use bolts, not studs, because I don't have enough clearance
by the master cylinder to use studs. Its not a high HP buildup
or anything, its a bone stock 318.

  Thanks!!

                                              -Jon-

 .---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----.
 | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL |
 | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly |
 `----------------------------------------- http://www.jonsteiger.com ----'



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:24 EST