Someone splain something to me.
If one is replacing the rockers with "high lift" units, why change the cam
for more lift? Why not just get the cam with the added lift? You're changing
it anyway. It's not like yu are adding so much lift the lifters can't do
their job.
My opinion is get the HP cam, get good rockers, and change lifters, pushrods
and valve springs. The springs are probably tired anyway, and can't take
advantage of the better cam.
JMO
Jon
STL MO
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:25 EST