You can get the 1/4" NPT Pipe Plug from Home Depot - $0.60
(approximately).
Brass or Steel.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Kyle
Vanditmars
Sent: Tuesday, November 19, 2002 10:35 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: RE: Re: IAT?
Ok, the coating is lighter than I originally thought, and I don't think
anything is wrong. The intake seems not to have an abnormally large
amounts of oil in it.
Bernd, the "1/4" NPT Pipe Plug" you recommend to block the hole in the
manifold as per your site, is that some sort of brass or copper fitting?
I'm guessing so, but I just want to be sure.
""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
news:000c01c28f79$8bd08ab0$090aa8c0@homenet.com...
>
> It's actually normal for the IAT sensor to have a light coating of oil
> on it. Remember, the PCV system sucks oil vapors back into the intake
> system...the IAT sensor (when installed in the manifold) gets coated
> with oil.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Tony
> Cellana
> Sent: Monday, November 18, 2002 6:30 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Re: IAT?
>
>
>
> The goo is abnormal. Try soaking it in alcohol. To check the
> bellypan gasket, pull the airhat, open the TB butterflies, and peer
> down with a flash light. If there is more than a light coating of
> oil, you probably have a bad belly pan gasket. TonyC
>
> -----Original Message-----
> From: Kyle Vanditmars <kylevan@telus.net>
> To: dakota-truck-moderator@bent.twistedbits.net
> <dakota-truck-moderator@bent.twistedbits.net>
> Date: Monday, November 18, 2002 7:28 PM
> Subject: DML: IAT?
>
>
> >
> >A quick question if someone wouldn't mind answering...
> >
> >I pulled the IAT to relocate it, and the thing was covered in what
> >looked and smelled like oil - it was a black, greasy substance,
> >anyway.
>
> >Is this normal? I'm thinking not. Would it be the belly pan gasket
> >leaking on me? Any help is much appreciated.
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:27 EST