I had a rear wheel speed sensor error and figured that
was the cause of my emergency flashers not working.
Since when they are on and you hit the brakes they do
not continue to flash until you release the brakes
again. My bulbs work because the lights function for
the turn signals but when I push the Emergency lights'
switch it doesnt flash or anything. Does that have
one of those little silver canisters as well?
Alberto
>
> There may be a "flasher" which is dying (usually
> a silver metal
> cannister in your fuse box) You may want to check
> your owner's manual
> to see if you've got one, and where it is; they are
> only a couple of
> dollars at Autozone, NAPA, etc. so you might want to
> replace it and see
> if that helps.
>
>
> --
>
> -Jon-
>
> .---- Jon Steiger ------ jon@dakota-truck.net or
> jon@jonsteiger.com ------.
> | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA.
> Rec & UL Pilot - SEL |
> | 70 Cuda, 90 Dak 'vert, 92 Ram 4x4, 96 Dak, 96
> Intruder 1400, 96 FireFly |
> `------------------------------------------
> http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:27 EST