Thanks Steve, I'm not currently running a chip in my PCM... I've got a flash
that my best friend made for me when he was in tech school...
"Stlaurent Mr Steven" <STLAURENTS@MCTSSA.USMC.MIL> wrote in message
news:5F7587961057D211ABE9004095102F7803C5B1A9@ex.mctssa.usmc.mil...
>
> After talking to the RAM guys, an ASE mechanic did a dyno run with a stock
> ECM and the Jet Stage II. The results were confounding when the stock ECM
> did better without the Stage II chip.
>
>
> My advice, go with a reflash, which is permanent than doing the following:
> the Jet Stage II is good until you turn off the engine. Then you have to
> disconnect the battery terminal to reflash every time you want the chip
to
> work. NOT GOOD.
>
> However, he post the dyno numbers on the RAM CHAT FORUM
(www.moparchat.com)
> .
>
>
> --------------------------------------
> Steven St.Laurent
> C4I System Engineer
> Engineering Branch, PSD, MCTSSA
> MARCORSYSCOM, U.S. Marine Corps
> Office (760) 725-2506 (DSN Prefix: 365)
> "<SNIP> Though, reading through history fables,
> some would claim the City of Damascus is the oldest
> city in the world. I thought it was Enoch, grandson of Cain,
> who founded the city of Enoch long before this city was
> ever resurrected from the dust bowls of the middle east."
>
> -----Original Message-----
> From: Josh Battles [mailto:jbattles@bankfinancial.com]
> Sent: Monday, November 25, 2002 6:48 AM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: RE: Re: RE: RE: PCM Programming: Robert Leech
>
>
> Interesting...let me know how it all works out, I'd be very interested in
> seeing some dyno numbers on a truck that's closer to stock to see if it
will
> improve over what I'm currently running.
>
> ""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
> news:005101c293c7$205aed00$090aa8c0@homenet.com...
> >
> > Nope.
> >
> > We've been working with another company on that though. Running the
> > program on my '97 V6 PCM already and it's working pretty darn good.
> > It's (so far) better than the Jet Stage-II and 1/4 mile times were
> > tested as well - new program was .4 quicker than the factory PCM with
> > Jet.
> >
> > It's primarily WOT only...but part throttle response is better than with
> > the Factory PCM or with Factory PCM and Jet Stage-II. No changes to the
> > engine in between tests either.
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Josh
> > Battles
> > Sent: Saturday, November 23, 2002 9:18 AM
> > To: dakota-truck-moderator@bent.twistedbits.net
> > Subject: DML: Re: RE: RE: PCM Programming: Robert Leech
> >
> >
> >
> > Does Leach have anything out for the V6? I didn't think so, so I'm
> > crossing my fingers.....
> >
> > -Josh
> >
> >
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:28 EST