ahhhh.... enter <quickor>! they have the best setup for this! everything
is in the kit...the only mod is that you have to open one of the holes on
their kit or drill a wider hole on your truck...everything else just bolts
right on!
if you have any question call them up and talk to their reps...or talk to
bernd...i think he might have a pic of them installed (www.speedtweaks.net)
Tim Althoff
www.yllwdkta.com
-----Original Message-----
From: Josh Battles
To: dakota-truck-moderator@bent.twistedbits.net
Sent: 11/26/2002 3:06 PM
Subject: Re: DML: sway bars
I DO want the hotchkis kit, but my truck didn't come with a rear
swaybar, it
was built as a base model (they don'e get rear bars) and from what I've
seen
every rear bar on the market requires that you have a stock bar before
you
try to replace it with theirs. I didn't think you could buy just the
hotchkis front bar, that's why i looked at addco (yes they make front
bars)
and some others.
-Josh
<blackdak@tampabay.rr.com> wrote in message
news:200211261929.gAQJTVCB005810@smtp-server1.tampabay.rr.com...
>
> Why don't you want the Hotchkis kit? I have them on my 97 CC and they
work
> great. Stiffened up the ride some, but worth it. I think Addco and
maybe
> Hellwig make rear bars only.
>
> Alex
> 97 CC Sport V8 5spd
>
> >
> > I've destroyed another set of swaybar bushings and this time when I
replace
> > them I'd like to get a new (stiffer) swaybar as well... I've got a
2000
CC
> > with a V6, but it's a base model so it doesn't have the rear
swaybar. I
> > don't want to get the hotchkis kit unless there's a way to install
the
rear
> > bar as well as the front, so I was looking at the addco front bar
instead.
> > Has anyone used this bar and liked it? Does anyone know how I could
install
> > the hotchkis rear bar for my truck (since I don't already have
one)?? I
was
> > thinking of just doing a front swaybar and then putting on the kenny
brown
> > x-brace to stabilize out the rear because that's easier than
fabrication.
> > Would that work just as well? If installing the rear bar would be
best,
> > fabrication would not be a problem.
> >
> > Confused in swaybarland.....
> > -Josh
> >
> >
> >
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:28 EST