> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
>> on Behalf Of Bob Tom
>>
>> At 06:03 AM 12/17/02 -0800, you wrote:
>> What are the specs? Thanks. Phil
>
> Phil, it's the Hughes HER1418AL cam. Valve lift @ 1.6:1 ratio
> is 0.520 intake, 0.544 exhaust. Lobe separation is 114 degrees.
> Duration @ .050" tappet lift is 214 degrees intake, 218 degrees
> exhaust.
>
> There are a couple of DMLers (that I know of) that have been using
> this cam in their 5.2Ls on the street and on the track for at
> least a year.
<snip>.> Bob
I'm one of those Bob mentioned with positive experience using this cam. I
installed the Hughes cam and the M1 2-bbl intake in May and have since
documented 164 drag strip runs and about a 1000 miles of street use. Let me
know if you're interested in details of my experience.
RayB
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:14 EST