fog light replacemet

From: Sam Hotmail (samjperez@hotmail.com)
Date: Wed Jan 08 2003 - 16:42:53 EST


Question Jeff,

What about the wiring. Did you have existing fogs? How did you wire the new
lights in? Were you able to use the factory switch? I am want to replace my
fogs, but haven't found a good replacement. Information would be great. I am
going to wal-mart tonight!!!! LOL

Thanks
Sam

Date: Wed, 8 Jan 2003 13:50:04 -0600
From: John_Neff@Dell.com
Subject: DML: Gen 3 Fog Light replacements found

For those who are interested, I found a suitable replacement for the factory
fog lights. Pilot makes a line called Cyber White which is carried by Wally
World (Wal-Mart). They are fakey HID's but have been working quite well for
me over the past 4 days. They are the same diameter as stock, 4", and they
can be mounted to the factory fog light mount with the included mount. I.E.,
light mounted to included mount which is then bolted to the factory mount.
They sit about 1/4" further forward than stock, but it's not noticeable.
Otherwise, they line up perfectly. Model # NV-602W for $39.95. They use a
55w PH3 bulb and the light pattern is very wide. I removed the bumper for
the install instead of trying to do it on the truck. Took about 1 hour start
to finish.

John
http://jndneff.home.texas.net/dakota/dakota.html
<http://jndneff.home.texas.net/dakota/dakota.html>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:41 EST