<snip>
I recently replaced all the shocks with Rancho RSX shocks and now when I go
over large seams in the road, I get a clunk from the rear end. Almost like I
had something loose in the bed that would bounce.
Do the Rancho shocks need a sleeve to go inside the bushing to keep it from
bouncing on the bolt? I checked most of the bolts in the suspension and they
are all tight. I did have to tighten up one of the stabilizer bar bolts that
hung on the rubber drop piece on the driver's side.
<unsnip>
I've been running the Rancho RSX's now for close to three years, about 55K
miles, and they have never clunked. I'm also using all of the stock bolts,
again without issue.
John
http://jndneff.home.texas.net/dakota/dakota.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:43 EST