Pretty much it, I did both of mine last summer and its much easier than the
FWD cars I own. Get teh lifetime axles from Auto Zone and be done with
them...
Vic in Phoenix
92 Spirit R/T
89 CSX
88 CSX-T
87 Shelby Lancer
84 Rampage TII
92 Dakota
----- Original Message -----
From: "David Henry" <DML@HenryWeb.net>
To: <dakota-truck@dakota-truck.net>
Sent: Thursday, January 16, 2003 9:50 PM
Subject: DML: Gen2 Front CV Shaft Replacement
>
> Anyone ever pull out and replace the front CV driveshaft on a Gen 2 4x4?
> I've ignored my punctured Inner CV boot and it's now making yucky noises.
> Acording to the FSM it should be fairly easy, and the only thing I really
> need to do is pull off the wheel, a cotter pin and nut on the outside, and
6
> bolts on the other. Is it really this easy, or will there be a bunch of
> other stuff that needs to be pulled to really get it off and back in?
Glad
> it should warm up to the 20's this weekend.
>
> David Henry
> 94' CC Sport 4x4; V8, 5sd, Lifted BFG 33" MT; Plow
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:43 EST