Josh, great advice about leaving the old pad on.
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Josh Battles
Sent: Wednesday, January 22, 2003 9:31 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: Re: How to put new rowders and break pads on my weels.
> Other than that, the only "special tool" is a BIG C-clamp ( 7-8") to
> compress the piston in the caliper.
Just remember to get that piston in there straight. I find it's easiest to
do when you leave that one pad on.
-- -Josh 2000 Dakota CC 3.9L
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:45 EST