Thanks everyone for the input. I'll probably give them a try.
Although i did see someone selling powerslot rotors for 189.00.
The JC whitneys are about 77.00 each
"Terrible Tom" <SilverEightynine@earthlink.net> wrote in message
news:3E40146C.1090102@earthlink.net...
>
> 2k_QC_4.7_5spd wrote:
> > Has anyone tried JC Whitney drilled and sloted rotors?
> >
>
> Yup - I used the on my 89 4x4. NEver had a problem with them at all. I
> can't really say as if they improved my stop time - but I can say they
> improved my braking quality. I have not had a set of pads glaze over
> since I started using them, and the rotors never warped. I had been
> driving in city stop and go trafic - and I am a lead foot - heavy gas
> heavy break. The heat dissipation qualities are obvious and were worth
> the purchase in my eyes. Great quality for the cost if you ask me.
>
>
>
>
> --
> --------------------------------------------------------------------------
------
> Terrible Tom
>
> "It's a living thing... It breathes, it eats, ...and it hates..."
>
> Silver '89 Dakota Reg Cab, V6, Auto, 8 footer, 4x2
> Silver '89 Dakota Reg Cab, V6, Auto, 8 footer, 4x4 w plow - (aka Granpa)
> Green/Silver '95 Jeep Cherokee, I-6 HO, Auto, 4 door, 4x4
>
> AIM Screen name: SilverEightynine
> Yahoo Messenger: SilverEightynine
>
> DML Profile URL:
> http://www.twistedbits.net/WWWProfile/dakota/LkxxVw49jp7dU/
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:49 EST